Sbobet สมัครสมาชิกวันนี้ รับโปรโมชั่นพิเศษ!!

[ad_1]

Sublimation printing is in progress, when the photo-quality images, graphics or text can be transferred to a wide range of items, including clothing, metal, acrylic that just to name a few, through heat transfer.

Specialized sublimation ink to be used when the ink is heated it changes its state to a solid to a gas, without the liquid phase. When this gas comes into contact with the polymer strands abkle it to pass through them, which in turn paints permantly tissue.

The sublimation process work effectively with the product to be printed must first poloymer or have been involved in polymer-based. (Ie poloyester shirt)

Since almost every item can be a polymer coating, this process alows prints onto almost anything, such as ceramic mug, glass, metal sheets, acrylic and other unisub elements such mousmats, washers, or by phone but a few cases. Sublimation printables are continually updated until the battery can be heat molded polymer-coated and very likely will be sublimated.

Because of this, it becomes a huge sublimation printing methods among the most popular in the industry.

The benefits of sublimation are as follows;

• sublimation method allows you to print color images on a hard surface with a polymer coating.
• Screen printing can be a complicated process of learning will be quite messy, which is a sublimation process easier to master.
• Sublimation allows the use of the full range of colors.
• Cost same number printed on one piece, it does print in 1000, that the customer does not have to order a minimum order quantity, so sublimation perfect printer for small businesses looking for promotional items or gift personalization market.
• completely customize the client. Sublimation printing requires no plates or a qualified screens, that is an easy process to customize each element of plans to change than individual names, club numbers.
• Sublimation can be a quick process depending, in order to allow the companies to offer same day or the hour in some cases printing.

Like anything could be cons and sublimation same. Sublimation are some drawbacks;

• The dyes can be quite expensive to buy than other OEM inkjet printer, which is usually built into the pricing sublimated products.
• The product should be printed or coated with a polymer or polymer fabric sublimation process to ensure it works effectively.
• Printables ideally be white or very lightly couloured. Since color dyes the fabric sublimation printing can not be used in the dark, for example black tshirts Printables.
• Although the sublimation process can access the full range of colors, it is very difficult to mange color printers, it has helped over the years with the introduction of the powerdrivers.

Sublimation really come into their own and the sector is growing fast, it is clear that over the benefits of why this is.

[ad_2]

Source by Adam Storr

[ad_1]

If you need to use the commercial print work or personal tasks, it can be difficult to know what to assign to the printer. There are so many different types of printing can be confusing for any consumer to which printing method is best suited for their particular project. In this article we will briefly describe the most popular types of printing, so the consumer is a little more understanding of each method.

is often the first important factor is to find and print a strong reputation in the field of printing. This printer should be able to help or give advice on many decisions that you need to print while getting a job. Ask around and do research on the Internet, if possible, compare the prices and services between one printer and another.

Digital printing is a new and highly effective form of printing. This type of printing eliminates the need for film and sheet, and sends a digital file directly from your computer to the press. Digital printing is relatively faster than other printing methods, so a convenient way to meet the deadlines and time restrictions.

electrostatic printing method similar to a photocopier, where color and drum sticks to a heat-fused to the paper. Similar electrostatic printing, digital printing, both processes useful and efficient printing of short runs.

The most popular printing process used by most printers Offset lithography. This is a method where the economical use of ink and set the time of the press is limited. This process, where the ink is offset metal sheets with a rubber roller to the paper. It is an affordable and most widely used method of printing.

One of the first and original printing methods of high pressure, which was developed by Gutenberg 1440. This is where the high-pressure first developed; The printed image is slightly raised from the surface of the disc – similar to a rubber stamp. This process is performed by the printer less new technology takes over the printing world.

The sharpest picture, engraving a printing method where the image feels pulled. This type of printing process is used for delicate or expensive paper such as letterhead, etc. Law Firm

thermography is a process which produces a raised image. This is a special powder or dust adheres to the wet ink. Heat is then applied, which is the powder and fuse the ink to form a raised surface. This method is effective stationery.

Reproduction is a general term that includes copying and reproduction. Most, if not all, of the printing company offers reprographics service, where they can take the original file or document, and to repeat them.

Screen printing is a process in which the ink is forced through screen printing. This is often used such as apparel, mugs, non-flat products, etc. This is a popular method for large-scale billboards and signage.

Flexography printing process used in the packaging of products. This process uses rubber sheets raised to reduce the printed areas of the plates is flexible, so you print many different materials available, such as plastic bags, bottle labels, cardboard boxes, etc.

Gravure an expensive high-quality printing process, which uses copper . This method is commonly used to print large volumes of high-quality materials such as magazines, newspapers, catalogs and more.
The best way to make sure the print results, you need to ask questions of the printer. It is important that the printing process delivers the desired results. Generally, if you have chosen a good printing products look like.

[ad_2]

Source by Dylan Brent

[ad_1]

HP, Lexmark, Sharp, Ricoh, Savin, and other manufacturers Brother laser printers and copiers, “office equipment industry standards are the same, the length of the toner cartridge is. They use the 5 % rule. However, most people print from 7% to 12% of average.

First, it must be determined to use our 5% rule toner cartridge laser printer, digital copier all in one machine. When the HP toner cartridge specifications page 10000 of 5% means that 10 000 pages of text with double space for a 8.5 “11 ‘1.25” margins (see below for the current 5% sample text n pages). If you just send a simple reminder of the laser printer copier you are set. However, most companies especially accountants and attorneys to use way more toner per page than 5%. Here is a 5% (the dotted lines page toner HP laser printer, Sharp copiers, Canon printer copier or other brands of office equipment:

Start this 5 % coverage notice will be an hP printer or digital copier. noted that only two paragraphs long. If that’s all you print, the average will manufacture the estimated-page toner cartridge will give you, it will be close. However, you will notice there is no graphics, company logos, or anything else. If you print out graphs or tax returns, your speed will use much higher.

If you have a color laser printer copier, then you need to be careful. Because if the color toner cartridges laser printer and digital copier says 5000 pages, it is not 5000 each color toner cartridges but the cumulative amount of cyan, magenta and yellow to this end, for example, 5% coverage textual standard sheet of paper printed on a laser printer, color copier or all of a copier printer scanner tool. – the end of the 5% .

If you do not know how to get the average page toner cartridge use contact us so that the data necessary to determine the then HP printer all in one Canon copier printer, copier Sharp, Rich scanner copier or printer device to a different brand. It does not cost to you a cent, information 100% [1945901million] free the asking.

[ad_2]

Source by Mike Klein

[ad_1]

There have been several models of the Samsung Laser Printer released into the market. However, many seem to present varying degrees of problems. Here are some common error codes in addition to troubleshooting tips:

error message: Scanning error

This error message is essentially a hardware failure. You can try to replace the USB cable. Sometimes poor quality cables can not transmit the data in great need of a scanner.

error message: Paper Jam

This is what happens when the paper is jammed in the Samsung laser printer. You need to check the output rollers located next to the sensor. Maybe it’s the wrong position or is damaged. If nothing works, try replacing it with a new sensor.

Error message: square prints

Sometimes there may be a Samsung laser printer prints out the squares instead of regular text. This can happen if you are using Firefox or printing content from sites which do not recognize the font used in the text. To solve this problem, you must install all the drivers involved again. If this does not help then visit the printers and faxes folder, select your printer and select Properties.

error message: missing print

Sometimes, a portion of the site can be free printing. This can happen because of incorrect paper size configuration. Check the settings and try again.

Error code: H2

This code indicates a problem with the fuser warming. Make sure that the cables are connected and that no point is missing.

error message: Media tray is empty

Sometimes even if the tray is full of paper may get this error message, Samsung laser printer. Try updating the drivers by visiting the Samsung site. This corrects issues.

Error: Toner light still on

after

replacement of the cartridge can still find the toner light switched on constantly. It is necessary to check the fuse located on the front of the cartridge. You could try 50 seconds replaced by this one. This error usually occurs in the Samsung SCX-4216F.

Code 24

This error code indicates that there is too much overload, if the print job is concerned. You can select the button called ‘continue’ and then try reducing the print job.

Code 50

This indicates a malfunction in the fuser. This means the fuser is not heating up. Try turning off your Samsung Laser Printer or resetting the printer for about 15 minutes and then turn it on again. In this case, it does not solve the problem, may indicate a problem with the fuser or the network.

Code 16

This code means that the toner is low. This means that the distribution inside the cartridge is inadequate. You need to remove the cartridge and put it back and front gently. If this does not work, try to replace the cartridge. You could also try cleaning up the contacts.

[ad_2]

Source by James Kara Murat

[ad_1]

That model was the Dimension SST 768 3D printer?
Functional 3D models are built from the bottom up, one layer at a time. Layers are built on each other to create a perfectly accurate 3D model.

What material is used?
to a strong, durable acrylonitrile butadiene styrene (ABS) plastic.

How to create layers?
layers are fused deposition created through molding (FDM). ABS plastic is fed to an extrusion head, heated to a semi-liquid state and accurately form the deposited filament layers as fine as 0.007 inches (0.178 mm) thick.

Do I need to change my 3D CAD file in order to prepare them for 3D printing?
The Dimension SST 3D CAD models can work in the way they are. No action required on your part. The Catalyst EX software automatically imports STL files, orients the part, slices the file generates support structures (if necessary), and creates a precise deposition path to build your ABS model.

How do I track all the layers created ?
The software automatically draws the precise deposition path to the printer to follow.

What kind of support structures and how work?
The material used for temporary structures in the layers of the Rapid prototyping 3D printer. It is used to fill voids, and will continue to be supported as the 3D model is built.

What about support structures after model is complete? After
completion of the build, support structures, easily removable. A mixing system that utilizes hot water and soap bath automatically washes the support structures.

How structures used to create moving parts?
The support structures can be integrated into a 3D model in places where otherwise empty space between a moving gear parts such as teeth spaces. When the supporting structure is dissolved, what was once a strong position connecting the two parts are now empty, so the movement of the two parts.

What are the benefits of ABS plastic?
Total of ABS plastic is tough enough to be used for working parts. ABS parts can be sanded, milled, drilled, tapped, painted and even galvanized. ABS prototypes higher level of accuracy of the models it produced photographic chemicals, wax or other 3D printing. Rapid prototyping ABS plastic is durable and accurate enough to really snap or pieces fit together. ABS allows you to build durable and functional prototypes that can withstand rigorous testing and will not warp, shrink or absorb moisture.

What colors are available?
Standard colors include white, blue, yellow, black, red, green or steel gray. Custom colors are also available.

How thick a layer of extruded plastic ? Between
Each layer of 0.010 in. (0.245 mm) and 0.013 in. (0.33 mm.) The extruded ABS plastic and accurately positioned excipient.

What size models can be created?
The maximum size of individual buildings 8 x 8 x 12 inches (203 x 203 x 305 mm). Larger pieces can build the various layers as the story of a building or multi-layer cake.

[ad_2]

Source by Nathan C Young

[ad_1]

will have to be removed from the ADF unit to the flatbed scanner off. When you remove the ADF, do not use the ADF cable is connected to the machine to lift or move. Once removed, it must be placed on a flat surface.

1). Turn the printer off and unplug the power cord form the printer.

2). While the viewer will see the back of the printer cable from the back of the ADF ADF scanner control board. There must remove the cover from the scanner panel of two screws. After removal of the cover is a ground screw to be removed. Now the two detachable cables. Before you remove the cable to take note of the way the cable is routed in the cable holder into the scanner.

3). Open the ADF unit as you are going to make a copy from the flatbed scanner and lift the ADF, the scanner. The ADF unit has been calibrated to work with the scanner, which is equipped with. If you decide to replace the ADF unit or install it on another flatbed scanner, the scanner is to be calibrated so that the ADF.

4). Lift the scanner unit to the top position. While facing the front of the printer, you can now remove the front edge. This piece on top of running in front of the flatbed and then just flip out.

5). Let’s look at the top left of the flatbed, the output side of the paper, remove the two screws that hold the scanner carriage lock cover.

6) .Facing the back of the printer, remove the screw on the left side is the right side of the scanner cover.

7). Close the lid and remove the two screws at the top that hold the left scanner cover into place. Use a magnetic screwdriver to avoid falling in the two screws. There is a spring located near the back of the cover, which is not bound. Be careful not to lose the spring, when the cover.

8). a metal plate with a series of holes in it now appears. Three holes that are larger than the other, and this is where the three bolts then must be removed.

9). toward the back of the printer, remove one of FFC (Flat Flexible Cable), and the plug was left of it on the scanner control board.

10). Facing the front of the printer, push the scanner slightly to the right and lift it off the printer. ATTENTION: Be careful not to release the scanner latch when removing the scanner assembly. The gas shocks that support the scanner assembly can damage the metal scanner assembly platform, if the platform on which the scanner assembly is not installed.

If you’re ready to get back to the reader is sure to align the signal from the scanner unit to clear the control panel to precisely place the scanner unit. The scanner assembly are correctly positioned on the metal platform, slide the assembly toward the left side of the MFP until it snaps into place.

[ad_2]

Source by Joseph Kaufmann

[ad_1]

Credit card receipt printers can either be built-in with the credit card terminal or can also be a stand-alone unit. Your choice may also be in between thermal and dot matrix printers. While a thermal credit card receipt printer is more expensive by a hundred dollars over a dot matrix printer, the former prints faster at 10 to 15 lines per second. Dot matrix receipt printers can only print up to 4 lines per second.

No matter what type of credit card receipt printer you invest on however, there are certain problems that you may encounter along the way. Find out how these problems can be fixed.

Troubleshooting credit card receipt printer problems

The most common credit card receipt printer problems include the following. Learn how to solve these problems:

1. Traditional receipt printers can give you a hard time while changing papers. In fact, your customers may complain to you about that. To avoid this hassle, you can invest on receipt printers with drop-in paper loading capacities instead. This one will certainly simplify the paper loading procedure and help you avoid customer complaints.

2. The cutting facility in the receipt printer will not work. The cutting facility is one that is used to chop a receipt. Your customers might complain if the paper receipt does not come out properly. In order for the chopping or the cutting of the paper to happen, you must make sure you invest on either an ECR or EPOS software. These can be responsible in delivering the cutting command to your credit card receipt printers.

3. There are also instances that your receipt prints but the outcome does not look the way you want it. There might be something wrong with the receipt format. In view of this, you have to modify the format you are using. If you are Microsoft using Dynamics RMS, please refer to the instructions on how to change receipt formats. You may also need to adjust the margins and other settings of the printer.

4. You may also encounter instances when valid credit cards are denied by the printer's card reader. In this case you may see extra characters appearing on the screen. Printout will also be affected.

5. There are instances when the printer prints the receipt but there are no texts found on the paper. This can happen for two reasons. First, you were not able to load the paper properly and second the top cover of the printer is open. Check on both these issues and you will be able to solve the problem at once.

There are still many problems which you may encounter. Solving these will all depend upon the printer brand you own. Therefore, make sure that you get the contact information of the company. Call them when you can not troubleshoot your printer's problem.

[ad_2]

Source by John C Arkinn

[ad_1]

There is a whole range of Lexmark and IBM printer error codes. If you find it difficult to diagnose which is which, then here is a primer to help you out!

Error code 22: Out of paper

This could indicate either a paper jam or a shortage of paper in your IBM and Lexmark printer. Make sure there is sufficient paper loaded into the paper tray and also check if there are any sediments collected along the path of paper. Check to see if the sensor flag for input is broken or not and also ensure the system boards and cable 2 is not defective.

Error code 31: Paper change needed

This means that your Lexmark and IBM printer has a different paper size configuration from what's needed in the software. Make sure to change the paper settings to adjust the size. Also check the printer software setup for any issues as well as the system board for any fault.

Error codes 41 and 43: Font related

These error codes usually indicate that the particular font needed is not available in the Lexmark and IBM printer. This could signal a faulty font card or a fault inside the system board. It might also mean that the font card had been removed while the power was switched on. If the font card is defective make sure to get a new one.

Error code 54: serial error

This error code indicates that the settings for the serial configuration between your computer and your printer are different. Make sure the communication cable, I / O cable and system boards are not damaged or improperly connected.

Error code 89: Overloaded output tray

This error code implies that your output tray is completely full. Make sure to take out paper from the output tray. You also need to check the operability of the respective flags. You can also try replacing the photo sensor for the card.

Error code 9920: Fuser not as per temperature

For this error code you need to monitor the resistance on the fuser as well as on the thermo fuse, lamp and the thermistor. There could also be a problem with low voltage. Check if there is continuity in the cable 1 of the system as well as inside the power cable inside the fuser.

Error code 970: improper turning on the fan

This means that the fan inside the Lexmark and IBM printer is not turning on. You could try to reseat the cables that lie between the system board and the fan. Also try resetting the printer.

Error code 24: Incorrect manual feed

This error code could come up due to a variety of reasons. If you are trying to put the paper inside manual feed at the same time the printer is taking off paper from the paper tray then the error could occur. Make sure not to put paper inside manual feed until and unless it has been explicitly requested.

[ad_2]

Source by James Kara Murat

[ad_1]

Flex Systems offers several powerful software packages to the direct mail industry and other stemming printing industries. Specifically, they produce software packages that handle variable data print and management, mostly for mailers and printers.

Their flagship product, FlexMail, was initially designed as an inexpensive way of importing data and arranging it on a layout template. In the template, users could include all the appropriate graphics, logos, fonts, and barcodes. Of course, FlexMail still does this, but the number of features have grown.

One of FlexMail's most exciting benefits is the sheer number of print drivers Flex Systems has developed and supported. FlerxMail is compatible with almost every major PCL based inkjet printer in the mailing industry. This includes Secap, Rena, Pitney Bowes, Neopost, Hasler, and even older printers like Bryce and Astro. The appropriate driver automatically loads a template that shows the position of the cartridges in that specific printer. FlexMail also supports some of the higher-end cartridge printers, such as XiJet, Domino L-Series, Walco, and more.

Other Features include the ability to import a PDF background document, produce a PDF Proof, or RIP variable PDF documents. Users can bring in a PDF document, and lay variable data right over the top!

FlexMail's newest feature in the US Market includes USPS Mail Processing. They've made it easy to CASS certify mailing lists and sort it according to postal specifications. What's more, the feature is cloud-based. No monthly updates are needed to keep up with regulations. It's all done by Flex Systems automatically. FlexMail USPS Mail Processing also offers a lot of extra free features, such as NOCA – MOVE Updates, Palletizing, etc.

FlexStream is a sister product. It allows users to generate documents for intelligent inserting equipment. Someone generating variable page statements for inserting equipment need unique identifiers. This is how the inserter distinguishes between documents and sets of documents. FlexStream users can simply overlay the marks to existing PDF documents BEFORE they are printed.

Why is this important? With statement work, it's common for the data to be prepared off-site by an IT team. The IT department does not always know the logic of the mechanical inserting equipment. So FlexStream builds a logical bridge between IT and printing / mailing departments. Now, they can easily generate OMR Marks, 2D Barcodes, or 3 of 9 barcodes that are compatible with envelope inserters. This includes large machines, such as Bell & Howell, Pitney-Bowes, and GBR. It also includes table-top models, such as Neopost, Pitney Bowes, Secap, Hasler, and Formax.

But FlexStream does not stop there. A final feature includes a camera interface, which makes it easy to do several things during the printing and inserting stages. It can read a 2D code on a product exiting an inserter or inkjet addressing printer, and "check it off" against the original file. It will also perform 2 way matches on Inserters, by comparing 2D or Datamatrix codes.

FlexMail also offers Tracking, for Read / Write or Read and Print on an inserter. So it can read a 2D code on an upstream document (in the inserter) and send the data to an inkjet printer to address a matching name on the outside of the envelope. Flexmail can also use an IMB verification camera, and check it against the original print file. It can also be programmed to shut down the inkjet printer or inserter if the IMB code fails to read.

Above all, Flex Systems software packages have one winning benefit: users can add features as they grow, instead of implementing the entire package at once. Not every printer or mailer in the industry needs every feature. So they can pick and choose which features will help them, without having to upgrade all of their equipment (or buy new equipment).

Overall, Flex Systems gets two thumbs up for their products' performance and the ability to integrate it with almost any existing system.

[ad_2]

Source by Rick K.

[ad_1]

Wow! Your wedding is fast approaching. So many things to plan. You want to make your wedding invitations.

That is a great idea. So what printer should you use. I am recommending an Epson Printer.

Why use an Epson Printer for your invitations :

1. It uses a fade resistant ink. This means that they will look better longer. You will get good color.
2. The ink is water proof. That is an excellent reason. If you decide to do custom envelope addressing you will love this feature. If your invite gets caught in the rain it will not look all messed up. If you have ever seen an ink jet paper get wet, you know they look bad. Avoid this at all cost. You do have to purchase the Espon ink. You can not use the ink refills!
3. You can print on almost any size. An RSVP card can be printed easily. This printer goes from 3 1/2 x 5 inches to 8 1/2 x 11 inches. This gives you the ability to print almost all size cards and matching envelopes.
4. All the inks are separate. If you run out of cyan you only have to replace the cyan ink. That means saving money.
5. The printer itself is very reasonably priced. I purchased my NX410 for seventy-nine dollars. Sales like this are going on all the time. What a great investment.

Make your wedding invitations with ease. By having the right equipment you can save money and still have very professional looking invitations. I have been using Epson printers for years. I used to use Cannon because of the separate inks. But this meant I had to use hair spray to make the ink waterproof.

Later I found out you could get the printers that would print in waterproof ink. What a help that was.

Yes, I believe the best printer for wedding invitations is an Epson printer. Not only because of the ink, but the price is so easy to justify.

I have 50th anniversary invitations that are almost 10 years old and look good. Since I have been making invitations for over 15 years, I have experience that allows me to give a good recommendation for this printer.

Once you make your wedding invitations, you can start printing other needs for your wedding. Think about printing your wedding programs, favors, labels for bubble bottles, and so much more. You can even print your place cards one up. That means that you might get some free scrap card stock at your local print shop. Saving money and having nice cards is just the beginning.

[ad_2]

Source by Mary Redfoot Harnetiaux