Month: June 2016

[ad_1]

brochure printing is one of the most important holidays of promotional materials by companies marketing strategy. In fact, most companies want the materials to the professional look and respect high quality printing standards, including tourist Actually focus on attracting a wider customer using these great marketing practices.

prospectuses of the most effective promotional materials for a successful business. Materials made of freedom can help people choose the best and most popular holiday services. Most hotels and guesthouses to invest large amounts of money every year Brochure Printing freedom in order to be easily recognizable to tourists and travelers. Promotional materials are often found in hotels, airports, ports, bus stations, train stations and travel agencies. Here are a few things you should take into consideration the high-quality results.

High Quality Pictures

Over the years, consumer expectations have changed. When the summer season approaching, there is nothing that sells well as landscape images. The quality of the images it is important to ensure that the materials are attractive to the target market. Add images to a variety of recreational activities for all ages is the best marketing strategy by most companies.

Characteristics of Materials Vacation

Brochure Printing freedom is an essential marketing tool for business people to keep old customers and gain new ones. They are useful in explaining the benefits and vacation packages for tourists. When it comes to choosing a holiday destination, a picture is worth a thousand words. You should also contain information Facilities, entertainment, optional excursions, costs and other necessary tips. These materials are also role is to inform the tourists, not just the destination.

Efficient Designs

Effective publication allows the customer to visualize the product in a positive way. It also includes information, such as climate, history, cultural tips and detailed information on flights, tours and accommodations. It is highly recommended that companies planning to diversify during the holidays.

Control the Message

Despite advances in technology, many people still turn to traditional print publishing preparing the perfect holiday vacation. These are helpful because they give interesting information in specific locations. If you want to expand our business further, you should try a wider range of distribution channels. They can be sent to people or during a given event, a variety of public places and sent directly to your email.

For the convenience of

An attractive brochure is a big difference between business and help you stand out against the competition. In addition, they allow the holiday to spend some time selecting a great holiday.

In order to increase your business, brochure printing holidays can be translated into different languages ​​to ensure that the business is known in the international market.

[ad_2]

Source by Aunindita Bhatia

[ad_1]

Copying and printing costs is the most important of those incurred by most companies. The company’s management is aware of this and are trying to take measures to curb them. The common and most important measure of any company puts in to restrict the use and imposes accountability by the user. This works out as well as people try to stick to the rules and avoid printing unwanted pages, therefore, is to reduce printing costs. As a result, the results, but this alone will not work in the long run.

Few companies have used click-charge, which is to supervise the contract or lease managed services copiers and printers in the office. The positive of this practice, the new machine the latest technology to reduce the cost per page, works well, and overall better performance by reducing the use and bring down the costs. This measure is a good one, but; it does not help the long-term cost-saving approach.

People seek out these two measures motion and assume that the problem must be solved, but the truth is that it creeps back in a few months. There are four steps to be implemented, to make a long-term monitoring.

1. Moderate and reduce the number of pages that printed or copied.

2. Moderate and reduces toner, ink and color usage.

3. Moderate and reducing the number of printers and copiers, monitors the use and cut back in addition to the cost per page.

should be limited to 4. The use of the access and optimized. The first step in raising awareness and accountability. This includes measures put in place and the rules that ensure that no unwanted or unintentional printing or copying. This creates a sense that people expect you to print only what is necessary. The plan the next actions.

a. Assessing individual usage and costs.

b. Inspection accidental duplication. For example, disabling multiple clicks the print icon.

c. Create pop-up warning messages you will receive a confirmation to the user when the page was to print.

d. Limiting the number of printed pages, full color printing, print the file type.

e. implement appropriate paper size to use, based on the value of quotas.

f. implementation of the system and charge the cost to the user or overall excess copies beyond all limits.

g. Implementation process keeps the file to print queue until the user confirms to print out. After performing the first step, which regulates the number of pages printed or copied, managing the next step, toner, ink and color usage. Most of the time, printing will take office use, or outline, and they should not be of high quality so that the settings of the printer can be changed to reduce the use of paint, and it helps to bring down the costs so that a larger extension. The plan provides for the following measures should be introduced. the. Flagged based on the use of toner is needed on the printed page.

b. In practice, the use of mono- and double-sided printing.

c. Implementation usage guidelines for specific users, the computer, or copy the file type.

d. Creating awareness of users to different settings for ink or toner cartridges can print images and text. The new technologically advanced devices and on their own, so a 20% saving on emissions quality is good. In fact, most of the files or documents are printed do not have a great quality so giving of limiting the scope of toner, ink and colored environments can reduce costs, greater extend.

Furthermore, because these devices are advanced and technological support to change the settings in the user or document is printed, you may still be able to take out high-quality prints if needed. It is important that this step be performed before approaching a managed service, it might be a good price than the cost decreased significantly, what it was before. The service contract will be paid in addition to the fixed cost of paint waste and excessive costs. It is therefore mandatory that this system, and reduce costs before approaching a managed service.

per page taking into account

third step used to work out the cost of equipment and the necessary steps to reduce it. The best way to do this is to replace the old inefficient printers, scanners and copiers up to date technologically advanced high capacity, low cost devices.

This further improves the quality of the print, as the technology is new and advanced. You might not buy the new equipment with the choice of managed services. These service providers are devices that are developed and virtually all of the costs included in the fee. They took out the particular print service improvements based on cost per page rate. Mostly also include the maintenance, hardware and software costs.

The final step would be to manage the implemented system of monitoring and review of the results achieved instead of the expected results. As the requirements and the trend of change, the system must be adjusted to meet the requirements. A software agent that provides the service collects data for all devices using SNMP and feeds on the host “cloud” application that can analyze the data, and advance the end-user management portal. As a user can control the use of more or fewer devices and possible violation if the portal based on the analyzed data. The optimization feature is available for the exchange offers or use devices to reduce costs.

There is a function that is called contract management capability that helps to maintain the contract and to the extent contain information on costs to be crossed, make sure any provider billing data. This is one of the best ways to help negotiate the renewal fees and the service provider, or help to evaluate the performance of the seller.

The point in
implementation, as well as the four steps listed will be drastic changes in the output and the costs incurred. All four steps must be carried out one by one followed religiously they are interdependent and the system will not work if someone is not properly followed.

[ad_2]

Source by Vaishnavi S

[ad_1]

Marketing Campaigns would not be the same without this handy, easy-to-read format for Brochure Printing. Many businesses in their promotional brochures included as collateral in a variety of ways. Every company has their own reasons for putting the time and effort Brochure Printing. But no matter what the reason, there are certain custom settings to all businesses should consider.

Finding the perfect fold

may base a simple half times, or if you want to have more information on that other options for folding brochures. Gate folds are a great way to get attention because of subsequent performance dramatically. Accordion pleats, folds and Z trifolds other effective options Brochure Printing. Folding plays in how customers consume the message is sent, and it is subject to how to lay out the information in the design process.

Feel the paper stock options

As beautiful as the layout design to find the right type of paper in the sense that brings it all together. This is more than paper; the feeling of the whole performance of the ink and printing of the publication can be changed depending on which paper you choose. Going green is a great option in terms of paper is selected. Many print service providers offer recycled material, so you can be sure your customers are proud of you for being environmentally friendly.

How to incorporate color

If the prospect that the color, you should be able to budget. Find a printer who does not add too much color brochures printing, or you can choose the color front and rear color printing or just the first save expenses. Either way, it is important that this aspect is taken into consideration before you place order for Brochure Printing.

Once developed these essential elements of brochure designs, you can get back to decipher the data layout. Make sure that you know exactly want to send to proceed with the printing of a brochure which command message. Having ironed out those aspects, it is also a good idea to take the time and effort to research a print quality service. You will know when you have found the printer that best suits your business, if you find a reliable customer service, easy ordering, quick turnaround and major online features.

[ad_2]

Source by Jesse Rees

[ad_1]

Some office products are available at once and last for many years until they are damaged, lost or outdated. Others require regular replenishment to maintain stocks and ensure the office can work professionally and efficiently. Here are 10 such items, it is worth picking up if you are selling products to the next office.

first scotch tape can not be used that often in the offices, but if you need it to be a more urgent – such as reinforcing packaging, which must be sent to the customer. For this reason, it is always a good idea to periodically check to make sure someone has not used the last roll.

2. Post notes tend to run out quickly, largely among its overwhelming popularity office staff. They’re great messages, memos and other notes, so make sure that staff have access to them as and when you need them.

3. The stapler can last a lifetime, but not terminal. They used to keep important files together, both internal and external use. If you are already a while since I last checked the terminal set this before your next order.

4 out of paper, you need to print an important document such as a proposal or an internal memo, can lead to embarrassing situations. Ensuring that a lot of printer paper, so it is very important. You may want to order more than normal A4 paper as well. Important documents to customers and suppliers are going to be printed on high quality printing paper.

5. You will also need to make sure that the printer is enough ink in them. It can be found unexpectedly if regular inspections do not take place, so it’s worth quite a few parts of the cabinet office products. However, make sure you’re keeping a close eye on what is in the reserves.

6 printers are not only the machines that require the ink. You should also check the copier that you have enough cartridges as well. Do I need to run multiple copies of important documents, if the copier is out of ink can cause problems at different levels.

7. If the office sends a lot of mail correspondence, such as posting checks or bills, then you need a good supply of envelopes to make sure that the finance and admin departments are functioning properly.

8. run out of office coffee and you’ll know about it soon enough. The staff will be needed in the kitchen is well stocked with tea, coffee and milk, so when you do that you run out, the order will be the most important restorations. Ideally, you’ll want to order when stocks are running low, and do not leave until the staff complain.

9. Toll disappear. Very. And I never want to be embarrassed, that is not anything to write. It’s a good idea to order a lot of blue or black ink pen and a red (as always come in handy).

10. You also need to make sure that the staff available to fresh notepads notes, brainstorming ideas and store important information.

[ad_2]

Source by Gina Michelle Francis

[ad_1]

Although many people will go to great lengths to save energy, and again in the trash at home, the same people are not always the “green-conscious” at the workplace. One of the largest source of trash businesses, and energy waste. It can be difficult to follow conservation practices at work when things have been hectic, with little time left to take care of the planet. Yet more important than ever to maintain a “green” mode, where we’re only; at work, at home, on vacation, or just a night out on the family. This article describes five ways to reduce your garbage creates the office. Once you have finished reading the article, inside pass on the ideas to your boss and colleagues.

use, it is used in case of book copy and used for printing on both sides of the paper. Remember: Reduce, Reuse and Recycle. If one side of the document page and read no further use, stack in a box reuse of the printer or copier. In a small office in a box near the printer and copier or it may be enough, but for all the major companies such person is used to store the paper in a tray ready again. Not only do both sides of the paper reduces the amount of waste produced at the office, you can also save your company money.

folders and envelopes, recycled waste paper. Instead of expensive and wasteful post-it note pads and envelopes and folders used to jot down notes. Although this may seem more confusing and messy, think of all the good that it is not for the environment. The paper used fewer trees, less paper waste, use less energy to recycle paper barely used. Is not it worth a little more discomfort?

By providing a central location Memo a bulletin board notices office space, you can eliminate the need to send a copy of every single note of every person in the office. The Memo site should be set up in a place like the workroom, where everyone is likely to go during the day. Dry erase boards can be useful if your company is not very big, but there is always the danger that a message is erased or blurred before you can read it. Take some time to compare alternative methods instead of getting messages all use large amounts of paper memos. Chances are there is a way that will not only save energy, but also saves time and money.

take advantage of new technology to e-mail more energy-efficient way to communicate with colleagues more than sending reminders. Companies save thousands of dollars and hundreds of trees every year by e-mail instead of paper correspondence. Also, check online before deciding the e-mail that, if printed out. Avoid simple automatic printing letters and use cut and paste a text editor (or Google Docs) to just print out the necessary information by e-mail.

Another good way to use technology to conserve paper, a fax modem that allows faxes to be printed directly from a computer without a hard copy of this. If you fax a regular fax machine, send a cover page only if absolutely necessary. Office products made of recycled materials, use of recycled paper and other office supplies, which are made from recycled materials. Staples, Office Max and other major office supply companies sell such things, but you can also search the Internet for a wide.

At the other end of the recycling process, you need to create bins around the office, and employee lounge paper, plastic and metal objects. Set up a recycling program might take a little work, but the benefits far aweigh for the inconvenience.

Avoid disposable products, disposable products whenever possible add to the growing problem of waste disposal in the country and is often completely unnecessary. Disposable paper cups can be replaced by ceramic mug. In some printer cartridges can be refilled. Packaging materials can be used and reused again. Small companies, which buy regular coffee machines instead of disposable paper filter is reusable.

Look around the place where you work. I am sure you will find small changes can add up to a big difference to the environment.

[ad_2]

Source by Jennifer Carpenter

[ad_1]

Quite often, when electronic devices do not work, or work that you immediately suspect a faulty switch mode supply. But you know that defective or shorted components on the motherboard or system board can cause the power supply shuts down too?

switch mode power supply (SMPS) is designed to be effective when there is a short circuit occurs on the motherboard and the power supply would be switched off completely stopped. If you have no experience about troubleshooting switch mode power supply, you might think that the power supply has a problem which is actually the main board is the real cause of no power problem.

switching power supply has a modern sense circuit (if you look at UC3842 PWM IC pin 3, stated I-sense, which means, in the current sense), and if there is a short circuit on the secondary side (or secondary diodes or motherboard), the recorded power would increase and this will lead the PWM IC to stop generating the power FET and thus the power supply is shut down. All this happens in a split second and you will not have the opportunity to know if any output voltage on the secondary side.

do not use some older design of SMPS power supply PWM IC, but can not be detected during the current draw of the circuit on and off whenever it detects a shorted component in the secondary side. A good example of the power supply used in printer. Printers usually have two boards; One was in power, the other main area. If there is a short circuit on the motherboard, power supply is not working. In order to isolate where the problem is, you have to unplug the power supply board. If the plug is removed from the motherboard, you can now turn on the printer and make sure that there is power present in the power supply connector.

If there are zero voltages measured at each supply (VCC) pin then we can conclude that the power supply is a problem and you can put your whole concentration in this power supply board. What if the voltages measured across the connector? This means that the motherboard is most likely caused by non-electrical short circuit problem is that some parts of the main board.

For your information, dot-matrix printers usually required two operating voltage. One was from 5 (logic IC, EEPROM and CPU) and the other is more than 30 volts to the engines. The question now is, how do we know if the motherboard is the main reason to shut down the power supply? Very simple, just use the analog multimeter set of X 1 Ohm and measure between the supply pin (say 5 volts pin) and the motherboard ground and then reverse the probes. A good board should not show two similar reading and if you get two similar ohms reading then this means that the 5 volt line had shorted to ground any defective parts.

If you have confirmed that the 5 volt line have problem then how to find the culprit, because there are so many components connected to this line? TTL IC, CPU, EEPROM, transistors, diodes and even small filter capacitors are all connected to the 5 volt line. Either one of these components can cause short-circuit does not have jurisdiction on the printer. You may remove the individual components lead (5 volt supply) on the main board and hope that the short circuit will be gone. Assuming you happen to remove one of the filter capacitor pin and the short circuit is gone, then we can say that the real culprit is the filter capacitor.

The real problem is what if the board has many components on it and it consumes a lot of time to isolate the problem by removing one pin at a time. It is not easy to identify the supply 5 volts pin to a spider IC that is 100 or more taps. Many spider IC 5V supply pin number. Some even have 4 and some supply pins 6-8. This means you have to check one pin at a time, until finally the location of the fault? Not only that, remove the supply pin from the spider IC and check for any short circuit between the grounds required a very good skill too. If you messed out the circuit board track, the main board can then be considered beyond repair. Despite the fact that you can repair the break in the track, it does not mean that they solved the actual fault!

Do you see the additional problem arises when you try to figure out the problem? There must be a better way to solve this kind of problem. Yes, it’s true that you can use ESR meter slowly to the source of the short circuit can use the ESR meter to locate short circuits in electronic tables checking the actual track resistance. A probe is connected to the ground and the other to the circuit line and if the measurement rises as you probe further along the track, you know you are heading to the wrong direction! If the ESR value decreases as you move along the track in the right direction. The problem is, what if the motherboard with double layers, 4 or even 8 layers? You may waste a lot of precious time trying to track the actual error in the ESR meter method! After explaining the problem so, now is the time that you expect that the answer to how to solve this kind of error quickly.

Do you know that the DC regulated power is used under supply that can power up electronic circuit can use to troubleshoot and find shorted component in a motherboard? Assuming you have confirmed that the VCC supply lines shorted to ground any defective parts, it is easy to detect the use of digital variable DC power supply is regulated. If there is not a digital one can always use an analog meter panel, which is cheaper.

Now connect the alligator clip to the positive output supply of 5 volt VCC pin in the main board and the negative output to the main board ground as shown in the picture. When all is ready, it’s time to turn the DC regulated power supply. Slow changes in the same clockwise and see the voltage increase. However, the current consumption can be seen in the current digital meter reading. Experienced if there is a short circuit on the motherboard, when the voltage increases, the current will rise dramatically and if no short-circuit would be less power consumption.

right back to this problem, if you notice that the power consumption will also increase (quickly) than in proportion to the increase in the voltage setting, it is now safe that is part of the main circuit board. What does it mean? This is a good news for us, because if the current drawn know the culprit by touching the hottest components on the main board too much. The finger touching any components that are very hot. Tap ICs, diodes, transistors, capacitors, etc. Once positioned so that only one component that is extremely hot to touch, it was the culprit! This is the real reason for trying to find! Has he used this method to solve many problems motherboard and is usually the culprit turned out to be a faulty gate array and ram IC.

Why did not immediately turn off the output voltage to a regulated DC power supply 5 V, since the defective board also uses 5V run? If I do this, and if the faulty components turned hot too fast, I fear this will lead to a defective part is normally open. If the faulty component open circuit, the current consumption is reduced, and the only clue we have to identify the culprit has been destroyed! If this thing happens, it will not be higher repair the board. Of course, still it can be substituted by each SMD spider IC, but it is certainly up a lot of time to repair.

The above method I just mentioned is not limited to printers motherboard; you can apply to other types of care, such as computer motherboards, hard drives, DVDs, VCDs, and industrial supplies, etc. Get a DC regulated power supply and I’m sure you can detect shorted component in the main board in the shortest time possible! Incidentally, the specifications of the DC regulated power supply that I was 5A 30 volts (variable type). Have a good day my friend!

[ad_2]

Source by Jestine Yong

[ad_1]

posters play a vital role in the dissemination of information for different applications. They are widely used for advertising or promotion of products and services, as well as announcing events such as birthdays and other events. The growing popularity of posters advertising and publishing tools in both commercial and personal purposes, a lot of poster printing companies have come up with various poster printing services. Although most of these services are expensive poster printing, poster printing services available are cheap wholesale discount and cheap rates.

companies make use of posters to advertise a product or service, and therefore they can increase their sales and earn more profits. In order to better take advantage of the benefits, you should always strive to keep the cost of advertising is minimal. Affordable using poster printing services companies in the most efficient and cost-effective manner disclosed their products, events and services.

A poster advertising campaign, there is no need to go to expensive production equipment posters. The most important requirement is that the image quality poster printing that instantly grabs the attention of potential customers. An affordable poster printing service does not mean poor image quality poster printing service. This type of service is of the same quality as an expensive poster printing service, but at an affordable price.

The most of poster printing company affordable poster printing on the same state-of-the-art facilities and poster printing techniques they use: other poster printing needs. These companies design and create poster prints at an affordable price, without the aura and image of the poster printing. The only difference is that the affordable poster printing, printing machines they use low set up cost and low-cost materials and printing inks.

[ad_2]

Source by Stephen D

[ad_1]

The lithography for printing and non-printing elements on the same level. More sophisticated printing zone, the fact that they are ink-accepting, areas where no printing plate ink-repellent. physical inter-face surface phenomena created by this effect.

lithography easily be divided into:

– Stone lithography (using direct printing technique stone plates)

– Collotype (direct printing method)

– Offset printing (indirect printing process), and

– Di-litho (offset printing plates for direct printing process).

lithograph was created by Alois Senefelder in 1796 took the stone image to be printed using a special ink. Moisten the stone was before or after that displays the non-image did not take the stone surface of the ink.

Collotype is actually a lithography technology. The light-sensitive gelatin is exposed to levels above a glass base on the negative and then developed. Locations are relative to different swelling properties of water produced. After the printing plate dampened differentiated shades absorption characteristics are formed. As well as stone lithography, collotype only usable art goods (and a very short print runs).

leading lithographic offset printing technology. This is an indirect lithography technology, in a situation where the ink is first transferred to the printing plate an adaptive midpoint carrier – the blanket – and subsequently to the substrate.

To a paint water-repellent effect of the plate (the typical interaction of platen surface and ink), two widely used techniques:

– Conventional offset technology: wetting the printing plate using dampening solution ( water with additives). A humidifier is a disc damping by a very beautiful film rolls. The non-image display at the hydrophobic sheet which is accepting oleophilic water-receptive and ink surfaces, only about 100% unreceptive water. The film of wetting inhibits the transfer of ink. Since this technology is by far the most widely used is essentially the hideous results from the ink and dampening regularly is always associated with “offset printing.” For this reason, inking and dampening required “offset printing.”

-Waterless offset technology mainly on the plate surface ink-repellent, for example, the corresponding layer of silicone. The ink-receptive base region is exposed to a deliberate interruption of a silicone layer (thickness of only about 2 microns). This treatment is called “waterless offset” (often a “dry offset”). Suitable for special inks and printing plates to be used for both of these techniques.

The di-litho technology, lithography technology that prints directly to the printing plate to the substrate, even specifically developed for newspaper printing. The benefit of this technology to the traditional high pressure rotary printing machines could be used. The printing presses, these units have been modified by installation of damper units. Printing was performed conventional printing plates, but a special coating was applied to them because very high stress due to direct contact with the paper and the high degree of stability was essential for journal printing the entire print run. This technology can only be played in a short time. When new investment journal printing companies, this kind of technology is replaced by a rotary offset printing presses, which print over the substrate blanket cylinder.

advantage offset lithography

– consistently high image quality.

– much faster and easier production of plates.

– extended life of discs, because they only come in contact with the printing blanket, which happens to be softer and less abrasive than the paper

– The most inexpensive production of high-quality images in large quantities.
Disadvantages

– the high cost of a small amount of

– The picture quality is excellent for commercial purposes but not as good as the rotogravure printing or screen printing.

[ad_2]

Source by Saso Gjorevski

[ad_1]

when printing multi-color jobs with an automatic press is the fastest and most effective way to get the job lined up and ready to print using the Tri-lock. This is a specially shaped piece of metal that slides onto the pallet arm and use the corner and the edge of the screen to create a consistent and uniform printing for all print heads. The tri-lock is the best tool for automatic press that the print is ready, and as long as you follow all the steps carefully should have perfect setting each time.

Step 1: Light up

Before I picked up the tri-lock the screen before the burning process begins. By using a light table be sure to coordinate all the movies to the same place of registration marks and must burn all screens. Be as specific as possible when one of the film slightly out of alignment the others will deny the use of the registration system, and you? I’ll fix it manually. If you burn the screens the film holder on the back burner table is used to keep the coordination and consistency where the image was burned. This is the key to the tri lock.

Step 2: Lock Em ‘in

Following the screens are burned and can be printed to download the corresponding print heads immediately according to press their color. the tri-lock fits into the top left corner of the left side of each screen, so you? re going to want to pull out and tight into place and lock the screen switches to the top of the print head. by ensuring the correct placement gives the equivalent to the results print every time another thing to remember to reset your print heads to ensure screens prior to loading the consistency of the tri-lock to function effectively

step 3. Test print

After all, screens are filled, since the tri-lock is used on each screen, and they? it has long been closed is? the place, and the ink has been filled with squeegees and flood-filled bars and locked into place is ready to do a test print. from basic as running a normal job. If used effectively in the tri-lock will give you a perfect test print registration marks on the first try lining up on each screen. If minor adjustments should be made based on a slight movement of the light table of the combustion process, the micro-registrations, thus preventing the desired printing.

Overall, the entire process is based on a tri-lock detail and a keen eye on the screens lit consistently. subtract lock screen in place is an important step and making sure the registrations you? Ll get the desired print test every time saving the headache of manually adjusting each color. Be patient and use the tri-effectively lock up the production and polish the finished screen printing products. You shouldnt be now ready for custom t-shirts

[ad_2]

Source by Mike Mizrahi

[ad_1]

print your own photos, drawings or text on the ceramic easier than you might think. This article discusses two popular techniques that will help you transfer images from your home ceramic surfaces such as plates, mugs and tiles, for example.

Method 1 – Using water slides papers to print designs onto ceramics

This is one of the easiest DIY projects I’ve ever done and professional results expected in the first attempt.

1 – Purchase a waterslide decal paper. If the ceramic surface with white or light in color, select the clean water slide decal paper. Alternatively, if the ceramic surface dark, go for the white slide decal paper. Sticker papers are available for both inkjet and laser printers work differently. We need to explain the difference later in this article. A package of five A4 pages is enough to print photos onto mugs or ceramic is about 20 maybe 10 plates.

2- Open your image or type text, Microsoft Word, or image editing software like Photoshop. You will need to size the work for you ceramic surface, such as a mug printing project, you can use the top left quarter of the page, and then print a test regular piece of paper, and maybe even cut that out and put the mug to we are pleased with the size.

3 – Load the transfer paper into the printer so that it lands on the printed onto the paper shiny side. This coated side of the paper, which is effective in a very thin film, which slides off the paper backing, when water is used later in the production process.

4 – Remove the printed image or text, and either cut it out now, or if it has reached the A4 sticker paper with pictures, leave it a piece as you can make the next step easier.

5 – If you bought inkjet waterslide decal paper, you will also need a clear varnish to the next stage as you start to apply the varnish on the image. Make sure that both waited at least 30 minutes or longer hair dryer used in the print is dry.

6 – Apply 2-3 rapid or spray paint over the image, each for about 10 minutes. Do not use too much, because it will harden the matrix, which will be inconvenient to apply to a curved surface. Apply to small and although you risk leaving a small area of ​​water or two to attend the printing, ink is smudge. True, he is not too affected by the application of paint ceramic printing with this method is very forgiving and follow the instructions with great results.

7 – Cut out the image near the edges and put a little water. Use your fingers to the paper under water, and also to keep it flat as it will automatically have a tendency to curl up when it hits the water. Once again, do not worry if it does not, we can easily flatten out again while in the water with your fingers.

8 – about 30 seconds, the paper backing suddenly become loose and slip off easily. Do not slide down, though. Remove the ceramic matrix of the water and slide down to 1 cm. Apply 1 cm of the film that has been slipping down directly on the ceramic surface and slide the other paper backing, so if the film printed directly on the ceramic surface. Gently down under the water to die fingers being careful at this stage, not to tear it.

9 – The sticker starts to harden almost instantly, and when it dries you can place in oven for another 10 minutes at 110 ° C

10 – Applying a coat of clear varnish will give extra support to the project. Waterslide decal paper, however, an excellent finish for decorative purposes. Hand wash any project with ceramic and do not place the finished work, such as ceramic cups and plates in a dishwasher.

The difference between inkjet and laser waterslide decal paper

The two label papers are similar and have the same desired result, the main difference is that you do not require the use of clear acrylic spray / clear lacquer laser-slide decal paper. You effectively can skip step 5 and 6 points. After ceramic laser projects a slide paper, of course, apply a clear varnish added protection and durability.

Method 2 – Use of applying ceramic paint your own ceramics designs

If you have some artistic flair, or just want to go to pottery painting, you start getting some of the basics, such as a suitable ceramic Paintbrushes. PEBEK and Liquitex the two leading brand of ceramic paint and brush size in Round 1 and 2 ¼ “flat would be suitable for small ceramic painting, for example.

Start by washing the ceramic surface with soap and water, dry and start drawing the design onto the ceramic using a pencil. Needless pencil marks can be removed from the water, or painted over. Choose a color and press the palette. ceramic ink will go a long way, but also dry and I do not mind quickly when you start and an idea before the start of the color scheme.

mix colors, apply the lighter color on the palette first, so if you wanted a gray color, you should apply some white in palette and a little dark, until it reaches the ideal gray. Keep in mixed colors in case you need them later finishing touches.

Start with the lighter colors first, and use one color at a time. Place a small amount of paint on the palette, but that a modest amount of round brush and paint evenly across the ceramic natural flow. Ceramic ink dry quickly, which allows an additional layer of quickly enough if necessary.

Use a liner brush (small brush) detailed edges. Lighter colors can be painted over when it comes to painting or darker colors, do not panic, if you go over the edges.

Continue to work using the lightest color in the darkest colors the last, and finally every last black.

Ceramic paint dries to a slightly raised surface about 3 hours and completely dry 48 hours. The finished work will be scratch-resistant and can be gently hand wash in cold water. Just like a paper sticker, do not put in the dishwasher finished ceramics.

[ad_2]

Source by Kareem Sherazi Naiyar