[ad_1]
when printing multi-color jobs with an automatic press is the fastest and most effective way to get the job lined up and ready to print using the Tri-lock. This is a specially shaped piece of metal that slides onto the pallet arm and use the corner and the edge of the screen to create a consistent and uniform printing for all print heads. The tri-lock is the best tool for automatic press that the print is ready, and as long as you follow all the steps carefully should have perfect setting each time.
Step 1: Light up
Before I picked up the tri-lock the screen before the burning process begins. By using a light table be sure to coordinate all the movies to the same place of registration marks and must burn all screens. Be as specific as possible when one of the film slightly out of alignment the others will deny the use of the registration system, and you? I’ll fix it manually. If you burn the screens the film holder on the back burner table is used to keep the coordination and consistency where the image was burned. This is the key to the tri lock.
Step 2: Lock Em ‘in
Following the screens are burned and can be printed to download the corresponding print heads immediately according to press their color. the tri-lock fits into the top left corner of the left side of each screen, so you? re going to want to pull out and tight into place and lock the screen switches to the top of the print head. by ensuring the correct placement gives the equivalent to the results print every time another thing to remember to reset your print heads to ensure screens prior to loading the consistency of the tri-lock to function effectively
step 3. Test print
After all, screens are filled, since the tri-lock is used on each screen, and they? it has long been closed is? the place, and the ink has been filled with squeegees and flood-filled bars and locked into place is ready to do a test print. from basic as running a normal job. If used effectively in the tri-lock will give you a perfect test print registration marks on the first try lining up on each screen. If minor adjustments should be made based on a slight movement of the light table of the combustion process, the micro-registrations, thus preventing the desired printing.
Overall, the entire process is based on a tri-lock detail and a keen eye on the screens lit consistently. subtract lock screen in place is an important step and making sure the registrations you? Ll get the desired print test every time saving the headache of manually adjusting each color. Be patient and use the tri-effectively lock up the production and polish the finished screen printing products. You shouldnt be now ready for custom t-shirts
[ad_2]
Source by Mike Mizrahi